To contact SEBO in Canada: SEBO America, LLC Floor Care Equipment, Ltd. Telephone: (800) 334-6614 Telephone: (800) 661-8687 Fax: (303) 792-9196 Fax: (800) 270-4807 Website: www.sebo.us Website: www.sebocanada.ca For Warranty coverage information please refer to your Warranty Card included with your SEBO vacuum cleaner.
22. Use only original SEBO replacement parts. it to a SEBO service center. 23. Do not use vacuum as a step. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp 24.
A warning light will quickly flash, the brush and upholstery nozzle. Many optional accessories are also roller will immediately stop spinning and available. The filter bag is also SEBO’s largest, with a dirt the vacuum will shut off, if an obstruction capacity of 1.4 gallons.
Another popular attachment is the hand-held turbo brush for attachments are available. The nine-foot extension hose removing pet hair from upholstery. SEBO filter bags can be pur- (extends suction hoses) and the 20-inch extension tube (extends chased in boxes of ten (or sometimes eight) and filters are sold instant-use wands) are very popular because they create useful separately.
If damage occurs, stop using the vacuum cleaner immediately! The standard brush roller on your SEBO vacuum is appropriate for most types of floor surfaces. However, a soft-bristle brush roller (X4 part # 5010GE or X5 part # 5290GE) that is designed for use on sensitive looped-pile carpets and/or hard floors is available for an additional charge.
Ensure that no children or pets can come into contact with the spinning brush roller. To vacuum walls, under beds, or higher-reach areas, etc., the SEBO AUTOMATIC X can be fitted with an additional straight tube (45) and the wall and floor brush (41).
VACUUM MAINTENANCE Always unplug vacuum from outlet before dismantling any part of machine! Changing the Dust Bag - Figure 10 To change the dust bag, pull the cover release flap forward (#5 on page 6) and lift the cover (7) from the dust bag housing.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! Clogs in the Airflow Pathway - Figure 15 Most clogs can be removed by accessing the airflow pathway via the orange colored access door (38) located on the underside of the power head. However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 6).
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Handle not fully inserted into the bag 1. Release handle catch, push handle housing, causing a faulty connection. down, close handle catch.
AUTOMATIC X4 SCHEMATIC AND PARTS LIST Power Head #9501AM X4 Onyx/Silver #9574AM X4 Spring Green #9570AM X4 White/Gray Machine #9558AM X4 Red/Gray #9577AM X4 Blue/Yellow Pos. Part # Description #9570AM X4 White/Gray 5781SE Power head cover, complete (incl. pos. 101-103+164) - white/gray black 5712WE Exhaust filter catch - white 5143...
AUTOMATIC X5 SCHEMATIC AND PARTS LIST Power Head #9580AM X5 White/Gray Machine #9580AM X5 White/Gray Pos. Part # Description #9587AM X5 Blue/Yellow 5791SE Power head cover, complete (incl. pos. 101-103+169) - white/gray black 5712WE Exhaust filter catch - white 5143 Exhaust filter 5711WE Exhaust filter cover - white...
Need help?
Do you have a question about the Automatic X and is the answer not in the manual?
Questions and answers