GE 21825 User Manual page 15

PROBLEMS CAUSES
Registration not The battery is not
work. sufficiently charged.
Handset and base
station were not
prepared for
registration.
No display. The battery has not
been charged.
No reactions to The keypad is locked.
keystroke.
No radio The handset is outside
connection to the the base station range.
base station:
The handset is not
registered.
blinking!
The base station does
not work.
Environment
Used equipment and used handset batteries must be disposed of in
compliance with current environmental protection regulations. You
should return them to your reseller or dispose of them at an approved
recycling centre.
Do not attempt to open the batteries, as they contain chemical
substance. In the event of leakage, avoid contact with the skin, eyes
and mouth. In the event of contact, rinse the affected part for several
minutes in running water. Clean the product with absorbent paper or
a dry cloth and contact your reseller for replacement batteries.
SOLUTIONS
Charge the battery for
14 hours.
Unplug and then plug in
the power adaptor.
Charge the battery or
replace them.
Press key longer
than 2 seconds.
Move closer to the base
station.
Register the handset (see
Registering Handset).
Unplug and then plug
the power adaptor to the
power outlet (220-230V
AC / 50 Hz) and the
other end into the power
jack on base bottom.
"WEEE" weight: 0.447Kg
15