Clifford Concept 450 Installation Manual page 32

Latched (ignition reset): The output on/off controlled by button(s) controlling
accessory if on, will turn off when the ignition is turned on.
accessory output b programming
The auxiliary accessory output wire (WHITE/BLUE) can be programmed for several
different types of outputs.
P1 0.8 seconds: The pulsed output is disabled with the ignition on or the alarm
armed.
P2 0.8 seconds: The pulsed output will operate any time.
Timed: The length of output duration set.
Latched: The output on/off controlled by button(s) controlling accessory.
Latched (ignition reset): The output on/off controlled by button(s) controlling
accessory if on, will turn off when the ignition is turned on.
one time valet - off/on
Off: Does not allow one time valet mode feature.
On: Allows one time valet mode feature.
accessory output a timer duration
Start Timer: Press the arm/disarm button; the siren will chirp to signal the start
of the timer duration setting.
Stop Timer: Press the arm/disarm button; the siren will chirp to signal the end of the
timer duration setting, or for maximum time, do not press the arm/disarm button.
N N O O T T E E : : The timer max setting is 255 seconds.
accessory output b timer duration
Start Timer: Press the arm/disarm button; the siren will chirp to signal the start
of the timer duration setting.
Stop Timer: Press the arm/disarm button; the siren will chirp to signal the end of the
timer duration setting, or for maximum time, do not press the arm/disarm button.
N N O O T T E E : : The timer max setting is 255 seconds.
30
www.directed.com