User Manual for Models CU0415, CU0715 and CU0920 Introduction The design of this product is the result of years of experience in developing commercial ice cube machines. It has been designed for simple operation in a wide range of locations. Please follow the instructions for installation and maintenance to get the most use from this ice machine.
User Manual for Models CU0415, CU0715 and CU0920 Important Details Warranty: The machine is designed for use indoors in a controlled environment. It must be kept dry, not The warranty statement for this product is provided overheated or subjected to excessive cold. The water separately from this manual.
User Manual for Models CU0415, CU0715 and CU0920 Pre-Installation Spacing: No additional spacing is required at the top or sides. This appliance is intended to be used in commercial However, suggested minimum side clearance for applications including: installation is 1/8 inch or 3 mm and suggested • Restaurant kitchens minimum top clearance is 1/4 inch or 7 mm.
User Manual for Models CU0415, CU0715 and CU0920 Component Location Cube Deflector Curtain Thermostat Sensing Point Thermostat Condenser Fins Drain Plug Bin Thermostat Adjustment Controller Control Area Condenser Fan July 2013 Page 6...
User Manual for Models CU0415, CU0715 and CU0920 Connect the water supply Connection Information: WARNING: connect to potable water supply only. Plumbing information: Important: Open the hand water valve to flush • The water supply connection is at the back panel. It water through the connection point before is a 5’...
User Manual for Models CU0415, CU0715 and CU0920 Connect the power This is a cord-connected unit, and must be connected to its own dedicated power supply. Check the dataplate on the back of the machine to confirm the voltage and per the dataplate use fuses or HACR circuit breakers.
User Manual for Models CU0415, CU0715 and CU0920 Control Panel and Adjustments Ice Bridge Thickness Adjustment Area ON / OFF / WASH Ice Bridge Thickness Adjustment MARCHE / ARRÊT / LAVAGE Réglage de l'épaisseur du pont de glace ENCENDIDO / APAGADO / LAVADO...
User Manual for Models CU0415, CU0715 and CU0920 Initial Start Up 9. Within a minute or so the ice formed in the mold will fall down and slide into the ice storage bin. 1. Remove the front panel by removing the two...
User Manual for Models CU0415, CU0715 and CU0920 Use and Operational Notes To use, simply lift the door by its bottom edge and No Step slide it up and into the top of the machine. Use the Do not stand on the machine.
User Manual for Models CU0415, CU0715 and CU0920 Maintenance 6. Mix a solution of 5 oz or 150 cc of Scotsman Clear 1 Scale Remover and 2.5 quarts or 2.4 liters of Regularly vacuum the right side of the air cooled...
Page 14
User Manual for Models CU0415, CU0715 and CU0920 7. Drain the reservoir into the storage bin by removing the drain plug. Return the drain plug to its normal position. 8. Wash all interior surfaces of the ice machine storage bin, reservoir surface and inside of the door with the remaining sanitizer solution.
User Manual for Models CU0415, CU0715 and CU0920 Before calling for service No ice – check water supply No ice – check power supply. Remove front panel, if there are no lights on the control panel either the bin thermostat is open, keeping the machine off, OR there is no power to the controller.