Advertisement
About Advanced Features & Operation
KEYPAD LOCK - T o prevent unauthorized use of the thermostat,
the front panel buttons may be disabled. To disable, or
'lock' the keypad, press and hold in the Mode button.
While holding the Mode button in, press the Up and Down
buttons in together. The Locked icon will appear on the
display.
Press all 3 for
Keypad Lockout
To unlock the buttons, again press and hold the Mode
button. While holding the Mode button in, press the Up
and Down buttons in together. The Locked icon will
disappear from the display.
SINGLE SETPOINT BEHAVIOR - When configured as a Single
Setpoint thermostat, page 11, step 3, the large number is
the setpoint. In Auto mode the deadband is above and
below the setpoint. To avoid short cycling in single setpoint
it is recommended to raise the deadband to a minimum of 2,
page 12, step 7.
Press and hold the Mode button for 2 seconds to display
the room temperature. Press any button to return to normal
display.
Press and hold the Fan button for 2 seconds to display the
outside temperature, if an optional outdoor sensor is
connected. Also see page 19.
MODE
Page 17
85
I2:00
55
Pm
C
OOL
Locked
55
H
EAT
Advertisement
