Getting Up And Running; Attaching The Camera Strap - Konica Minolta DINAX MAXXUM 7D Instruction Manual

GETTING UP AND RUNNING

This section covers the preparation of the camera. This includes the changing of
batteries, memory cards, and lenses as well as the use of external power supplies.

ATTACHING THE CAMERA STRAP

18
G
ETTING UP AND RUNNING
Always keep the camera strap around your
neck in the event that you drop the camera.
Pass the tip of the strap through the camera's
strap eyelet from below (1). Attach the strap
so the tip comes between the strap and the
camera. The side of the strap with the
remote-cord clip (p. 45) should be attached to
the side of the camera with the remote-
control terminal
Thread the tip of the strap through the holder
ring and the inside of the buckle and pull to
tighten (2). Leave some slack in the camera
strap so the tip may be threaded through the
buckle easily.
Push the holder ring toward the strap eyelet
to secure the strap to the camera (3). Repeat
with the other end of the camera strap.