Auto Af Setup; Control-Dial Setup; Control-Dial (Exposure Compensation) Setup - Konica Minolta DINAX MAXXUM 7D Instruction Manual

Table of Contents

Advertisement

AUTO AF SETUP

The operation of the Auto AF focus mode (p. 52) can be specified in section 1 of the
custom menu (p. 92). This custom function has two options:
Auto AF - the AF system automatically switches between
single-shot AF and continuous AF depending on the
subject's motion.
DMF - Direct manual focus. After the AF system focuses,
the manual focus indicator (MF) appears in the viewfinder.
The focus can then be adjusted manually by the
photographer.

CONTROL-DIAL SETUP

The operation of the control dials in the full-auto program, program, and manual
exposure modes (p. 39) can be specified in section 2 of the custom menu (p. 92). This
custom function has two options:
The front control dial adjusts the shutter speed.
SS
F/no.
The rear control dial adjusts the aperture.
The front control dial adjusts the aperture.
F/no.
SS
The rear control dial adjusts the shutter speed.

CONTROL-DIAL (EXPOSURE COMPENSATION) SETUP

Exposure compensation can be assigned to the front or
rear control dial in section 2 of the custom menu (p. 92). In
the recording mode, simply turn the selected control dial to
adjust exposure compensation. The increment depends on
the exposure-compensation dial position. For more on
exposure compensation, see page 97.
96
C
USTOM MENU
Ctrl dial set
SS
F/no.
Exp. comp.
Off
Ctrl dial lock
Off
Exp. comp. set
Ambient&flash
On
AF illuminator

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynax 7dMaxxum 7d

Table of Contents