Notes On Printing Errors - Konica Minolta DINAX MAXXUM 7D Instruction Manual

The number of prints in the print run are displayed as well
as the print parameters selected with the menu. See the
menu navigation section for more information (p. 134).
Press the central button of the controller to begin printing,
or press the menu button to return to the PictBridge screen.
Once printing begins, the operation can be canceled by
pressing the center of the controller. The printing-finished
message indicates the end of the operation; turn the
camera off to end the routine.

NOTES ON PRINTING ERRORS

If the battery is exhausted before the print run is complete, printing is canceled. Use a
fully-charged battery or the optional AC adapter.
If a minor problem occurs during printing, such as the paper runs out, follow the
procedure recommended for the printer; no action is required for the camera. If a major
printer error occurs, press the center of the controller to end the routine. Refer to the
printer manual for the correct procedure for the printer problem. Check the printer
settings before starting again and deselect the images that were printed.
No. of prints: 5
Print size: Printer setup
Layout: Printer setup
Print quality: Printer setup
Data print: Printer setup
:start
Printing finished.
OK
133