Fuel Filler Cap - Honda GX25 Owner's Manual

04/09/17 11:27:43 32Z0H600_018
1. Oil change
Drain the oil while the engine is still warm to assure rapid and
complete draining.
1. Check the fuel filler cap is tightened.
2. Remove the oil filler cap and drain the oil into the oil container
by inclining the engine toward the oil filler neck.
3. Refill with the recommended oil (see page
level (see page
ENGINE OIL CAPACITY (Disassembly):
0.08 (0.08 US qt , 0.07 Imp qt)
The oil capacity with replaced is less than the oil capacity with
disassembled.

FUEL FILLER CAP

UPPER OIL LEVEL
4. Install the oil filler cap.
If any oil is spilled, make sure to wipe it.
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take it in a sealed container
to your local service station for reclamation. Do not throw it in the
trash, pour it on the ground, or down a drain.
5 ).
UPPER OIL LEVEL
18
6 ) and check the oil
OIL FILLER NECK