Breville Recommends Safety First - Breville Thermal Pro Stainless BEF500 Instruction Booklet

BREvILLE RECOMMENdS SAFETy FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARdS
REAd ALL INSTRUCTIONS
BEFORE USE ANd SAvE FOR
FUTURE REFERENCE
• Do not place frypan near the edge of a
bench or table during operation. Ensure
the surface is level, clean and free of
water.
• Remove any promotional stickers before
using the frypan for the first time.
• Do not place the frypan on or near a hot
gas or electric burner, or where it could
touch a heated oven. Place frypan at
least 20cm away from walls and curtains.
• Do not use on metal surfaces, for
example, a sink drain board.
• Always insert Temperature Control
Probe into probe socket before inserting
power plug into power outlet and
switching on appliance. Ensure the
probe socket is completely dry before
inserting the Temperature Control
Probe. Ensure the probe is fully inserted
into the appliance.
• To protect against electric shock, do not
immerse cord or Temperature Control
Probe in water or any other liquid.
• Ensure the Temperature Control Probe
has cooled before removing from the
appliance.
• Always remove Temperature Control
Probe before cleaning the appliance.
• Only the Temperature Control Probe
included with the frypan must be used
• If using plastic utensils, do not leave in
frypan when hot.
• Never immerse cord and/or heat probe
in water or any other liquid.
4
• Do not place hot glass lid under cold
water.
• Extreme caution must be used when
the appliance contains hot oil or other
liquid. Do not move the appliance
during cooking. Allow the frypan to cool
before removing oil or other liquid.
• Place frypan at least 200mm away from
walls and curtains.
• Do not touch hot surfaces.
• Do not leave the appliance unattended
when in use.
• Always turn the Temperature Control
Probe to the large dot, then switch off
at the power outlet and allow probe to
cool, then remove probe and unplug, if
appliance is to be left unattended, if not
in use and before cleaning.
• Keep the appliance clean. Follow the
cleaning instructions provided in this
book.
• Always use the appliance on a dry, level
surface.