Operating Your Breville The Thermal Pro Stainless - Breville Thermal Pro Stainless BEF500 Instruction Booklet

OPERATING yOUR BREvILLE THE THERMAL PRO STAINLESS™

BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Wash your
frypan and lid in hot soapy water. Rinse and
dry thoroughly.
Do not immerse the cord, plug and/or
Temperature Control Probe in water or any
other liquid.
OPERATION OF yOUR FRyPAN
1. Insert the Temperature Control Probe
into the probe socket on the appliance.
Plug into a 230/240V power outlet and
switch 'On'. Always insert the probe into
the appliance first, then insert plug into
power outlet.
NOTE
Before inserting the Temperature
Control Probe into the probe socket;
ensure the interior of the socket is
completely dry. To do this, shake out
excess water then wipe the interior of
the socket with a dry cloth.
2. Turn the dial on the Temperature
Control Probe clockwise to the desired
setting. The red heating light on the
probe will illuminate.
3. The red heating light will remain
illuminated until the frypan reaches
the desired temperature. Once the
temperature has been reached, the red
light will cycle 'On' and 'Off' during
cooking to maintain the desired
temperature.
4. When cooking is completed, turn the
dial anti clock-wise until the first dot
is aligned with the red heating light.
Switch off at the power outlet and
unplug.
Cooking
Off
5. Leave the Temperature Control Probe
connected to the appliance until cool.
NOTE
This frypan must be used with the
Temperature Control Probe provided.
Do not use any other probe or
connector.
Recommended heat control probe settings
dIAL SETTINGS USES
•
2 - 6
•
6 - 8 •
•
8 - 12 •
•
•
•
12 - 14 •
•
14 - Sear
•
Keeping food warm
Basting
Slow cooking e.g.
casseroles, curries
and soups
Cooking roasts
Browning nuts
Shallow frying
Pancakes and crepes
Rice and pasta
Sealing steaks and
roasts
Sear
Cakes and self
saucing puddings
9