Needle Threader; Cutting The Thread - Husqvarna Viking Tribute 140C User Manual

NEEDLE THREADER

The needle must be in the up position to use the built-in
needle threader. We also recommend lowering the presser
foot.
1. Use the handle to pull the needle threader all the way
down, catching the thread under the guide (A).
2. Push back to bring the needle threader forward until the
metal anges cover the needle. A small hook will pass
through the needle eye (B).
3. Place the thread under the anges in front of the needle,
so the thread catches into the small hook (C).
4. Let the needle threader gently swing back. The hook
pulls the thread through the needle eye and forms a loop
behind the needle. Pull the thread loop out behind the
needle.
5. Place the thread under the presser foot.
Note: The needle threader is designed to be used for size 70-120
needles. You cannot use the needle threader for size 60 needles or
smaller, the wing needle, twin needle, triple needle or when the Sensor
One-Step Buttonhole Foot is on. There are also some other optional
accessories that require manual threading of the needle.
When threading the needle manually, make sure that the
needle is threaded from front to back. The white presser
foot ankle makes it easy to see the eye of the needle. The
bobbin case cover can be used as a magnifying glass.

CUTTING THE THREAD

Once you have nished sewing, cut the threads by raising
the presser foot and pulling the threads from the back
to the front into the thread cutter on the left side of the
machine.
12 – Get ting Ready to Sew
A
1
C
3
4
B
2