Western Digital Sentinel DX4000 Administrator's Manual page 54

7. Click Next. A progress bar displays while the USB flash drive is being prepared.
8. Upon completion of the process, the Recreate Storage page displays:
9. Follow the instructions under Next Steps:
a. Shut down the WD Sentinel server.
b. Insert the USB flash drive into one of the server's USB ports.
c. Restart your server while pressing and holding the Recovery button on the back of the
server.
d. Continue to hold the Recovery button until the LCD displays "INITIALIZING OK. LOADING
RECOVERY." Release the Recovery button.
e. Allow the recovery process to complete. When it is done, the LCD displays "STORAGE OK."
10. When the process is done, the server's LCD displays "STORAGE OK." Click Finish.
WD SENTINEL DX4000
ADMINISTRATOR'S GUIDE
USING THE WD SENTINEL SERVER'S FEATURES
50