Western Digital Sentinel DX4000 Administrator's Manual page 36

1. Verify that the LED for the bad drive is solid red.
2. Open the door on the front of the server.
3. Unlatch the handle on the front of the drive.
4. When it snaps open, pull out the drive.
5. Slide the replacement drive into the drive bay, making sure it is seated properly. and that
it is facing the right way.
6. Using some force, snap the handle shut.
7. Close the door on the front of the server, making sure it snaps shut. The LED remains
blank until the rebuild is complete. The rebuild percentage displays on the LCD.
WD SENTINEL DX4000
ADMINISTRATOR'S MANUAL
MANAGING STORAGE ON THE WD SENTINEL SERVER
32