Preparation; Installing/Removing The Optional Battery Pack - Kenwood TK-260G Instruction Manual
Vhf fm transceiver/ uhf fm transceiver
Hide thumbs
Also See for TK-260G:
- Service manual (50 pages) ,
- Instruction manual (22 pages) ,
- Service manual (50 pages)
Table of Contents
Advertisement
PREPARATION
Installing/Removing the Optional Battery Pack
The optional KNB-14 or KNB-15A battery pack is not
charged at the factory. Charge the pack before use. If
after purchase or extended storage (greater than
2 months), battery capacity is found to be low, the
battery pack needs recharging. Repeating the charge/
discharge cycles two or three times will restore the
battery to its normal capacity.
1 Position the four grooves on the inside edges of the
battery pack over the corresponding guides on the
back of the transceiver.
3
Hide quick links:
Advertisement
Table of Contents
