Sony HVL-F60M Operating Instructions Manual page 77

Flash
Hide thumbs Also See for HVL-F60M:
Table of Contents

Advertisement

5
Use test-flash to check the flash.
• The test-flash method differs depending on the camera used. For details,
refer to the operating instructions of your camera.
• If the test-flash does not work, change the position of the camera, flash, and
subject, or point the wireless control-signal receiver towards the camera.
Moreover, make sure that wireless channel of the off-camera flash is set to
the same channel as the controller.
6
Check again that the controller and the flash unit are
fully charged, and press the shutter button to take the
photo.
• Even if wireless control setting is set to [RATIO: OFF] (lighting ratio
control off), the controller flashes to transmit a signal.
77
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents