Sony HVL-F60M Operating Instructions Manual page 26

• Depending on the conditions of use or the age of the batteries, the battery dead
screen may appear without the low battery indicator being shown.
• Even if the low battery indicator appears, it may disappear when you change
from flash to LED light or vice versa.
Overheat indicator
During continuous flash use or use in a high temperature environment, this unit
becomes hot and its internal safety circuit temporarily prevents firing. (Overheat)
• The overheat screen is displayed when overheating is detected.
• The flash operation is suspended until the temperature of the unit falls.
• Press any button on the flash unit to change to another screen. If that is the
normal indicator screen, the
button are disabled)
• Set the power switch to OFF, and then stop use of the flash unit for Approx.
10 minutes to allow the temperature of the unit to cool down.
Overheat screen
26
GB
indicator flashes. (MODE button and LIGHT