Sony HVL-F60M Operating Instructions Manual page 57

• When the shutter button is pressed halfway down, the distance at which the
proper exposure is obtained appears on the LCD panel. Set the aperture to match
the displayed distance to the shooting distance.
• In manual flash photography, if the power level is set at 1/1 then the flash will go
off at full power. The power level range (e.g. 1/1 t 1/2) corresponds to the
aperture range (e.g. F4 t 5.6).
• The flash range check indication of the TEST button (blinks in green) does not
work after a photo is taken with the manual flash.
• The flash range is not shown when using upward flash bounce, with wireless
flash, when communication with the camera is off, or when an off-camera cable
is used.
Proper exposure is obtained at less than 1.0 m.
If the flash range is less than 1.0 m, the lower area of
the image on the LCD monitor of the camera may
become dark. Change the flash range to adjust the
aperture and ISO sensitivity.
Proper exposure is obtained at more than 28 m.
57
GB