Download  Print this page

Honeywell ADEMCO 6152ZN User Manual

Hide thumbs
   

Advertisement

ADEMCO 6152 / 6152V / 6152ZN Remote Keypad –
User Guide
Addressable Fixed English & Voice Fixed English Keypads
AWAY
BYPASS
STAY
ALARM
FIRE
CHECK INSTANT CANCELED
Sounder
Programmable
6152V Microphone
Function Keys*
*
The Function Keys can be be programmed
for special functions or panic alarm activations.
See the Function Keys section and check with
the system installer for more information.
6152V VOICE CONTROL KEYS
KEY
FUNCTION
VOLUME ADJUST
PLAY/STOP RECORD
VOICE KEY
FUNCTION/RECORD
SETTINGS KEY
The Settings key provides an easy method to test the keypad display.
To enter Display Test mode, press and hold the
SINGLE BUTTON ARMING
If desired, the Arming Keys can be set for Single Button Arming by following
prompts to store a valid user code in the keypad. (See the system User Guide
for details on programming user codes.)
When Single Button Arming is disabled, a valid user code is required to arm the
system with the Arming keys
NIGHT
NO
AC
PHONE
TEST
NOT READY
CHIME BAT
Arming Keys
DESCRIPTION
Refer to the 6152V Keypad Voice
Features section for details using these
keys.
Fixed Word Display
2-Digit Zone Identifier
The '21' digits are used for specific
trouble indications. Refer to the
control panel instructions for details.
= System ARMED
= System NOT ARMED
= READY to Arm
= NOT READY to Arm
6152V: Message Indicators
= Recording Message
= Message Recorded
= No message
See the keypad's User Guide for details.
6152V Keys
key for 2 seconds.

Advertisement

Table of Contents

   Related Manuals for Honeywell ADEMCO 6152ZN

   Summary of Contents for Honeywell ADEMCO 6152ZN

  • Page 1 ADEMCO 6152 / 6152V / 6152ZN Remote Keypad – User Guide Addressable Fixed English & Voice Fixed English Keypads Fixed Word Display 2-Digit Zone Identifier The ‘21’ digits are used for specific trouble indications. Refer to the control panel instructions for details. AWAY NIGHT = System ARMED...
  • Page 2 Enabling Single Button Arming 1. Press and hold down the keys at the same time for 3 seconds. The screen displays the keypad’s address. 2. Press to move to the User Code entry screen (the screen flashes “u4”, “- -” and “- -.”) 3.
  • Page 3 To record a message: Press keys. The MESSAGE ICON ( ) will light, indicating recording is in progress. Note: A message cannot be recorded during the Exit Delay period. To end recording: Press key, the keypad will ‘ding’ twice to indicate recording is ended.
  • Page 4 REFER TO INSTALLATION INSTRUCTIONS FOR THE CONTROL PANEL WITH WHICH THIS DEVICE IS USED FOR WARRANTY INFORMATION AND LIMITATIONS OF THE ENTIRE ALARM SYSTEM. 2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Copyright © 2013 Honeywell International Inc. www.honeywell.com/security Ê800-13636V1JŠ 800-13636V1 7/13 Rev A...

This manual is also suitable for:

Ademco 6152Ademco 6152v

Comments to this Manuals

Symbols: 0
Latest comments: