Miele Coffee System Operating And Installation Instructions page 75

To reassemble the lid:
^ First put the seal in the lid. Then
insert the milk intake pipe into the
seal.
Make sure not to slide the beveled
end of the milk intake hose into the
seal.
Step 2: Cleaning the air intake
hose and angled section in the
front door
Do not use a needle or similar sharp
item. They can damage the parts.
^ Open the service cover on the back
of the front door.
Cleaning clogged milk pipework
^ First detach the air intake hose a
from the opening c. Then pull off the
angled section b.
^ Pull both hoses out of the angled
section.
^ Clean the air intake hose a using the
supplied cleaning brush. "Blowing
through" can also dislodge any
blockages.
^ Clean the opening for the air intake
hose c in the front door.
^ Clean the angled section b under
running water. If necessary, replace it
with the supplied spare part.
^ Insert the brush into the milk hose d.
Move the brush back and forth until
all milk residue has been removed.
75