Configure Router Bgp Distance; Default Route Preference (Administrative Distance) Values - Alcatel Router User Manual

Chapter : BGP4 Configure Commands

configure router bgp distance

This command changes the default distance value on a router.
Higher values are preferred.
parameter definition
distance Default preference value
The range is 0-255; the default is 170.
syntax:
[ no ] distance distance < n >
example:
- /configure/router/bgp 10> distance 20
Alcatel host
Table 9 Default Route Preference (Administrative Distance) Values
How Route is Learned
Directly connected network
Static
OSPF non-external route
RIP
Generated or aggregate
OSPF AS external routes
BGP
related commands
configure router bgp aggregate_address
configure router bgp always_compare_med
configure router bgp default_metric
configure router bgp group
configure router bgp neighbor
configure router bgp redistribute
applicable systems:
All models.
Default Command to Modify Default Preference
Preference
0 Not configurable.
1 Not configurable.
10 configure router ospf distance ospf non_external
100 configure router rip distance
130 Applicable to BGP only, and is not configurable.
150 configure router ospf distance ospf external
170 configure router bgp distance
55
Router User Guide