GE Calibur DVMRe StoreSafe SDVR-10 User Manual page 42

•
Set motion detection as Activity detection or Intrusion Detection.
•
Configure the motion detection parameters on a per camera basis.
Main Menu → Motion Detection → Enable/Disable Detection
q
Selecting Enable All or Disable All from this menu will activate or deactivate
motion detection on all cameras.
Selecting Individual Enable from this menu will bring up the following menu.
Individual Enable Menu
Use this menu to enable or disable motion detection on a per
camera basis. Rotate the Jog to navigate, and the Shuttle
to change the values.
Main Menu → Motion Detection → Setup Parameters
q
Use this menu to select the Camera, Motion Detection Type, and Sensitivity of the Motion Detection
you wish to configure.
Navigate in this menu using the Jog to select the field and the Shuttle to change the parameters.
0150-0229B
Motion Detection Parameters Setup
Camera
Motion Detection Type
Sensitivity
Relay Output
Rejection
Target Size
Link to Alarm
[CANCEL]
01
ACTIVITY
06
2
LOW
01
NONE
[OK]
42
Individual Enable
Enable All
Disable All
Detection Enable
Camera 01: Enable
Camera 02: Disable
Camera 03: Enable
:
:
Camera 10: Enable
[CANCEL] [OK]
Calibur StoreSafe