GE Calibur DVMRe StoreSafe SDVR-10 User Manual page 36

3. To exit the menu without making changes: Press the Menu button, or select [CANCEL], then
press the Enter button.
Main Menu → Record → Alarm/Event Actions
q
Use this menu to specify how the unit will record during Alarm and Event actions.
Pre Event Duration: The unit will record up to 5 seconds of data ahead of the event trigger, at the
Event Record Rate. Select from 0 to 5 seconds. This option is not available on the standard model.
Post Event Duration: The unit will record up to 250 seconds after the completion of the Event, at the
Event Record Rate. Select from 0 to 250 seconds.
Pre Alarm Duration: The unit will record up to 5 seconds of data ahead of the alarm trigger, at the
Alarm Record Rate. Select from 0 to 5 seconds.
Alarm Record Mode: Select from Interleaved or Exclusive.
ACTIVITY Link to Event: Select from Yes or No.
Main Menu → Record → Disk Maintenance
q
Use the Jog to select from the following options, then press the
Enter button to begin.
Delete: Delete all data from the hard disk (with the possibility of restoring it).
Undelete: Restore data that has been deleted, but not yet overwritten.
Destroy: Erase all data from the hard disk permanently, without the possibility
of restoring it. Selecting this option brings up a confirmation dialog box.
Main Menu → Record → Record Lock
q
Use this menu to set the Record Lock feature. This feature disables the front panel
record button. Setting Record Lock to ON will start the unit recording if it is not currently
in the Record mode.
0150-0229B
Alarm/Event Actions
Pre Event Duration
Post Event Duration
Pre Alarm Duration
Alarm Record Mode
ACTIVITY Link to Event
[CANCEL]
36
5
0
0
Interleaved
Yes
[OK]
Delete
UnDelete
Destroy
OFF
ON
Calibur StoreSafe