Table of Contents
Advertisement
Macro Excluded Features
The following core features or settings cannot be programmed by Macro.
•
Disk Maintenance.
•
Erase Archive Medium.
•
POTS Setting.
•
Ethernet Setting.
•
RS485 Network Address.
•
Front Panel Lock/Unlock.
•
Record Timer.
Running A Macro
A macro is a recorded sequence of up to 32 keystrokes. To activate a
macro, press the Function button followed by the Number button of the
desired macro. While running, the macro is indicated on-screen as the letter
F and the macro number.
The user can cancel the macro at any time by pressing the Function button.
Daylight Savings Time
To adjust the time one hour for daylight savings time, press the Function
button, then the Sequence button. If this function is activated during April,
one hour is added to the time. If this function is activated in October, one
hour is subtracted from the time. This function will only operate once per
time period.
Main Menu → Macro → Timed Macro Start
q
Use this menu to program scheduled start times for macros. Up
to 20 scheduled start times can be programmed in this menu.
Event: Select the scheduled start event you wish to edit.
Day: Select the start day (Monday – Sunday) of the macro.
Select ** (double asterisks) to run the macro every day.
Select None to cancel the scheduled start time.
Time: Select the start time for the macro.
Macro: Select the desired macro number.
A form is provided in section 10 to keep track of scheduled macros.
3.12 Motion Detection
Use this menu to:
•
Enable motion detection on a per camera basis.
•
Activate individual zones in a scene to respond to motion
detection.
•
Activate the on-screen motion detection indicator.
0150-0229B
41
{F}
1
Function and
Number Buttons
{F}
Function and
Sequence Buttons
Timed Macro Setup
Event :
01
Day
: Monday
Time
: 00:00
Macro : 01
[CANCEL]
[OK]
Enable/Disable Detection
Setup Parameters
Setup Active Zones
Indicate Detection
Calibur StoreSafe
Advertisement
Table of Contents
