Table of Contents
Advertisement
3.7 The Main Menu
Main Menu Overview
The Main menu contains the majority of programmable options for StoreSafe. Each item in the Main
menu is described in detail in this section of the manual.
Main menu items appear in this section in the same order they appear in the menu.
3.8 Time/Date
Use this menu to specify:
•
The time and date.
•
The date format: MM/DD/YY, YY/MM/DD, or DD/MM/YY.
•
Which monitors will display the time and date.
•
Set Regional Daylight Savings Time.
Main Menu → Time/Date → Set Time
q
1. Rotate the Shuttle to navigate, highlight HH MM SS.
2. Press the Enter button, the highlighting will move to the row of numbers.
3. Enter the time in Hours, Minutes, and Seconds. Rotate the Jog to
change the values and the Shuttle to navigate.
4. Press the Enter button to confirm the selection and exit the edit mode.
5. To save the changes and exit the menu: Rotate the Jog to select [OK],
then press the Enter button.
6. To exit the menu without making changes: Rotate the Jog to select
[CANCEL], then press the Enter button.
Main Menu → Time/Date → Set Date
q
1. Press the Enter button, the highlighting will move to the row of
numbers.
2. Enter the date in Months, Days, Years. The day of the week is
calculated automatically. Rotate the Jog to change the values
and the Shuttle to navigate.
3. Press the Enter button to confirm the selection and exit the edit mode.
4. To save the changes and exit the menu: Rotate the Jog to select [OK], then press the Enter
button.
5. To exit the menu without making changes: Rotate the Jog to select [CANCEL], then press the
Enter button.
0150-0229B
29
Set Time
Set Date
Set Date Format
Time/Date Display
Set Region
Time Setup
HH MM SS
03 05 53
[CANCEL]
[OK]
Date Setup
MM DD YY Day
01 28 02 MON
[CANCEL]
[OK]
Calibur StoreSafe
Advertisement
Table of Contents
