Table of Contents
Advertisement
3
Menu System Overview
3.1 Menu Notation In This Manual
In the following sections, there are headings like this:
Main Menu → Time/Date → Set Time
q
Meaning: From the Main Menu, select Time/Date, then press the Enter button. The Time/Date menu
will appear. From the Time/Date menu, select Set Time, then press the Enter button. A pop-up or
pull-down menu will appear.
Selected Items
Items selected in the menu system are represented in the manual as follows:
Selected
Time/Date
3.2 Accessing The Menu System
Enter the menu system by pressing the Menu button. A Password Box will appear
on the primary monitor. Enter either the:
•
Operator Password: Providing limited access to the menu system. Only the
Operator menu is available.
•
Installer Password: Providing complete menu access.
Use the Number buttons to enter the appropriate password.
Default passwords are provided in the beginning of this manual, in section 1.
3.3 Available Menus
0150-0229B
Main
Time/Date
About StoreSafe
Record
Time/Date Display
Alarms
Titles Display
Macro
Alarm History
Motion Detection
Operator Password
Camera Setup
QuickWave Setup
Audio Setup
Communications
Front Panel Lock
Factory Settings
Passwords
27
Operator
Not Selected
Time/Date
Menu Button
Calibur StoreSafe
Advertisement
Table of Contents
