Replacing The Memory Module(S) - Dell Inspiron 17R Owner's Manual

Hide thumbs Also See for Inspiron 17R:
Table of Contents

Advertisement

Replacing the Memory Module(s)

Procedure
CAUTION: If you need to install memory modules in two connectors, install a
memory module in the connector labeled "DIMM A" before you install a memory
module in the connector labeled "DIMM B."
1
Align the notch on the memory module with the tab on the memory-module
connector.
2
Slide the memory module firmly into the connector at a 45-degree angle, and press
the memory module down until it clicks into place. If you do not hear the click,
remove the memory module and reinstall it.
NOTE: If the memory module is not installed properly, the computer may not
boot.
2
1
1
tab
2
notch
Postrequisites
1
Replace the base cover. See "Replacing the Base Cover" on page 20.
2
Replace the battery. See "Replacing the Battery" on page 13.
3
Follow the instructions in "After Working Inside Your Computer" on page 9.
4
Turn on your computer.
As the computer boots, it detects the memory module(s) and automatically updates the
system configuration information.
To confirm the amount of memory installed on your computer:
→ Control Panel→ System and Security→ System.
Click Start
22
|
Memory Module(s)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 17r-5720Inspiron 17r-7720

Table of Contents