Replacing the LAN Board
Procedure
1
Connect the LAN-board cable to the LAN-board connector.
2
Carefully turn the LAN board over and align the screw holes on the
LAN board with the screw holes on the computer base.
3
Replace the screws that secure the LAN board to the computer base.
Postrequisites
1
Replace the palm rest. See "Replacing the Palm Rest" on page 41.
2
Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
page 29.
3
Replace the base cover. See "Replacing the Base Cover" on page 20.
4
Replace the keyboard. See "Replacing the Keyboard" on page 18.
5
Replace the battery. See "Replacing the Battery" on page 13.
6
Follow the instructions in "After Working Inside Your Computer" on page 9.
LAN Board
|
51