Replacing the Keyboard
Procedure
1
Slide the keyboard cable into the system-board connector and press down on the
connector latch to secure the cable.
2
Slide the tabs at the bottom of the keyboard into the slots on the palm rest and
place the keyboard on the palm rest.
3
Gently press around the edges of the keyboard to secure the keyboard under the
tabs on the palm rest.
4
Close the display and turn the computer over.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 13.
2
Follow the instructions in "After Working Inside Your Computer" on page 9.
18
|
Keyboard