Installation Points To Remember - Viper 700 ESP Installation Manual

installation points to remember

This security system represents many years of research and development. It is very sophisticated and should only
be installed by experienced security installers. Please do not attempt installation of this product without reading
this guide. The system has been designed to provide the ultimate in security, coupled with limitless convenience
and expansion options.
This product is not intended for consumer installation. It must be installed by an authorized dealer.
Do not disconnect the battery if the vehicle has an anti-theft coded radio. If equipped with an airbag, avoid dis-
connecting the battery if possible.
IMPORTANT! Many airbag systems will display a diagnostic code through their warning light after
they lose power. Disconnecting the battery requires this code to be erased, a procedure that can
require a trip to the dealer.
Before beginning the installation:
I Check with the customer on status LED location.
I Remove the domelight fuse. This prevents accidentally draining the battery.
I Roll down a window to avoid being locked out of the car.
After the installation:
I Test all functions. The "Using Your System" section of the Owner's Guide is very helpful when testing.
I When testing, don't forget that this system is equipped with Nuisance Prevention
bypass both instant trigger zones, making them appear to not work.
4
Circuitry (NPC , which can
® ™ )
© 2000 Directed Electronics, Inc. Vista, CA