Check The Wireless Network Status - Samsung Galaxy S II Epic 4G Touch User Manual

To connect to a Wi-Fi network:
1. Press
2. The network names and security settings (Open network or Secured with xxx) of
detected Wi-Fi networks are displayed in the Wi-Fi networks section.
When you select an open network, you will be automatically connected to the

network.
To manually add your new network connection:
1. Tap Add Wi-Fi network.
2. Enter the Network SSID. This is the name of your Wi-Fi network.
3. Tap the Security field and select a security option. This must match the current security
setting on your target network.
Note: If secured, you will also need to enter the wireless password. The show password
option reveals the password as you type it instead of showing only asterisks (****).
4. Tap Save to store the new information and connect to the Wi-Fi network.
Note: The next time your device connects to a previously accessed or secured wireless
network, you are not prompted to enter the wireless password again, unless you reset
your device back to its factory default settings.
To manually scan for a Wi-Fi network:
1. Press
2. Press

Check the Wireless Network Status

1. Press
2. Tap the wireless network that the device is currently connected to. You will see a
message box showing the Wi-Fi network name, status, speed, signal strength, and other
details.
3. The following icons show your Wi-Fi connection status at a glance:
<image> Wi-Fi is connected and active.

<image> Wi-Fi active but there is a communication issue with the target Wireless

Access Point (WAP).
Web and Data
> and tap
> and tap
and tap Scan.
> and tap
> Wireless and network > Wi-Fi settings.
> Wireless and network > Wi-Fi settings.
> Wireless and network > Wi-Fi settings.
130