Check The Wireless Network Status - Samsung SPH-L300 User Manual

Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for
your phone to connect to a Wi-Fi network. It may be necessary to provide a user name
and password for certain closed wireless networks.
Connect to a Wi-Fi Network
1. Press
2. The network names and security settings (Open network or Secured with xxx) of
detected Wi-Fi networks are displayed.
When you select an open network, you will be automatically connected to the

network.
When you select a secured network, you will need to enter the wireless password to

connect to the network. Enter the password and tap Connect. You can use the
show password option to display the password as you enter it.
Manually Add a New Network Connection
1. Tap Add Wi-Fi network.
2. Enter the Network SSID. This is the name of your Wi-Fi network.
3. Tap the Security field and select a security option. This must match the current security
setting on your target network.
4. Tap Save to store the new information and connect to the Wi-Fi network.
Note: The next time your phone connects to a previously accessed or secured wireless
network, you are not prompted to enter the wireless password again, unless you reset
your phone back to its factory default settings.
Manually Scan for a Wi-Fi Network
1. Press
2. Tap Scan.

Check the Wireless Network Status

The following information is designed to help you check your wireless connection.
1. Press
2. Tap the wireless network that the phone is currently connected to. You will see a
message box showing the Wi-Fi network name, status, speed, signal strength, and other
details.
Web and Data
> and tap Settings > Wi-Fi.
and then tap > Settings > Wi-Fi.
and then tap > Settings > Wi-Fi.
149