Table 3-5. Modem (Unit) Parameter Detail - Datum Systems PSM-500 Installation And Operation Manual

Operation
Tables 3-5 through 3-8 describe the parameters available from the front panel and entry in more
detail. The grayed separators delineate column divisions in the area matrix. The "»"symbol
indicates that this parameter is not available unless a preceding parameter is enabled or set to
require those parameters, or optional hardware is installed that uses that particular parameter.
Parameters can also be added as new options are installed.

Table 3-5. Modem (Unit) Parameter Detail

Representation
Status Modem
Locked & Sending
Status Reference
Internal, OK
Status Redundcy
1:1 On Line
Status Unit ID
Rmt Santa Cruz
Status Model
PSM-500
Status Feature
M523-8PSK-16QAM
Status Serial#
12923
Status Version
0.10
Status FEC A
Viterbi/TCM/RS
Status FEC A Ver
01-004
Status FEC B
TPC4K
Status FEC B Ver
03-004
Status Mod Opt
Burst
Status Int'f Opt
SDMS-Lite
Redundcy Mode
Internal 1:1
Redundcy Sw Rqst
on Alarm A & B
Page 3-12
Unit Parameter Detail
Type Entry
Read Only Read Only
Read Only Not changeable
Read Only Used to force a transfer
away from this unit.
Alpha – Entered as ASCII for up to
Numeric 16 characters
Read Only Read from software
Numeric 16 digit Feature Set upgrade
code inserted here.
Read Only Not changeable
Read Only Read from software
Read Only Read from Installed Option
Read Only Read from Installed Option
Read Only Read from Installed Option
Read Only Read from Installed Option
Read Only Read from Installed Option
Read Only Read from Installed Option
Selection 0 = Disable, 1 = Internal 1:1,
2 = External
Selection 0 = On any Alarm
1= On Alarm A
2 = On Alarm B
3 = On Alarm A & B
PSM-500/500L/500LT SCPC Satellite Modem
Description
Mod & Demod Status
Reference source and
status
Redundancy Status
Station Name for user
Modem Model #,
Used to display features and
upgrade feature set.
Modem Serial Number
Version of software installed
Available FEC options in
Slot A.
FEC Type Number and
Firmware Revision
Available FEC options in
Slot B.
FEC Type Number and
Firmware Revision
Type of Installed Option
Type of Installed Option
Select Redundancy mode.
Internal requires "Y" cable.
What will request a switch to
backup modem.
PSM-500/500L/500LT - Rev. 0.91