Advertisement
The following table explains the messages that
appear in the display.
Message
Blank Disc
Check Disc
Complete!
Explanation
A blank CD-R/CD-RW you have
just bought or a CD-RW you have
entirely erased is in the unit.
You are trying to record or edit a
finalized disc or CD. Or you are
trying to edit a CD-R.
Editing has been completed
successfullv.
Data Disc
You are trying to record or edit a
non audio CD-R/CD-RW.
l
Insert an audio CD-R/CD-RW.
Disc Full!
There is not enough time left on the
CD-R/CD-RW or there are no
recordable tracks available to
comolete a manned recordina.
Erase
Ex-Change
Fade In
The ERASE function is operating.
During CD playback, you remove
and insert another CD.
The FADE IN REC function is
Fade Out
Finalize
Incomplete!
The FADE OUT REC function is
operating.
The FINALIZE function is
operating.
Editing has not completed
successfully due to the vibration of
the unit or a dirtv or scratched disc.
Initialize
Name Full!
The unit does not memorize the
Setup Menu settings or the
previous playback state.
The number of characters used for
the track or disc names is beyond
the maximum.
-NO DISC-
There is no disc in the unit.
No Name
There is no title.
Message
Not Blank
Explanation
You have tried the MARE DISC
Synchro-Recording, with a disc
that is not blank.
l
Use a blank disc for the MAKE
DISC Svnchro-Recordine.
OPC
OPC Over
-Over-
PMA Writing
Push STOP!
Step Full!
TEXT Edited
OPC: Optimum Power Control
The unit is optimizing itself for
best possible sound.
The number of times OPC
recording has been performed 90
times.
l
Stop the recording and finalize
the disc.
The playback of the last track is
over.
l
Turn AMS counterclockwise (or
press I44 or 44 on the remote).
PMA: Program Memory Area
A disc's information is being
updated.
You operate the unit not in the
STOP mode.
* Stop the unit, and then operate the
unit again.
Recording or editing has been tried
again.
The number of programmed tracks
has reached the limit, and you
cannot program any more tracks.
l
Before you program a new track,
erase the current program and
restart a new program procedure.
A disc whose text has been edited
but has not been finalized is
inserted, and OPEN/CLOSE has
been pressed.
l
Finalize the disc, and then press
OPEN/CLOSE to remove the
disc. If you want to remove the
disc before finalizing it, press
OPEN/CLOSE again while
"TEXT Edited" is displayed.
The UNFINALIZE function is
operating.
Unfinalize
29
Advertisement
