Shifting Procedures - Jeep 2014 Grand Cherokee Owner's Manual

NOTE: Refer to "Selec-Terrain® – If Equipped" for fur-
ther information on the various positions and their
intended usages.

Shifting Procedures

4WD HI To 4WD LOW
With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the
ignition switch in the ON position or the engine running,
shift the transmission into NEUTRAL, and press the
"4WD LOW" button once on the transfer case switch. The
"4WD LOW" indicator light in the instrument cluster
will begin to flash and remain on solid when the shift is
complete.
Transfer Case Switch
NOTE: If shift conditions/interlocks are not met, or a
transfer case motor temperature protection condition
exists, a "For 4x4 Low Slow Below 3 mph (5 km/h) Put
Trans in N Press 4 Low" message will flash from the
Electronic Vehicle Information Center (EVIC). Refer to
STARTING AND OPERATING 421
5