Jeep 2014 Grand Cherokee Owner's Manual page 349

and operating information. To make your selection, touch
the Hill Start Assist soft-key, until a check-mark appears
next to setting, indicating that the setting had been
selected. Touch the back arrow soft-key to return to the
previous menu.
• Brake Service
This feature will be grayed out while vehicle is in motion.
When this feature is selected, it will allow the service of
the rear brake components. To make your selection touch
the Brake Service soft-key, until a check-mark appears
next to setting, indicating that the setting had been
selected. Touch the back arrow soft-key to return to the
previous menu.
• Auto Park Brake
When this feature is selected, the vehicle will automati-
cally set the Park Brake when the vehicle is shifted to
park. To make your selection, touch the Auto Park Brake
soft-key, until a check-mark appears next to setting,
UNDERSTANDING YOUR INSTRUMENT PANEL 347
indicating that the setting had been selected. Touch the
back arrow soft-key to return to the previous menu.
• Hold 'n Go™
When this feature is selected, the vehicle will automati-
cally hold its position when it comes to a stop To make
your selection, touch the Hold 'n Go™ soft-key, until a
check-mark appears next to setting, indicating that the
setting had been selected. Touch the back row soft-key to
return to the previous menu.
Lights
After pressing the Lights soft-key the following settings
will be available.
• Headlight Illumination On Approach
When this feature is selected, the headlights will activate
and remain on for 0, 30, 60, or 90 seconds when the doors
are unlocked with the Remote Keyless Entry (RKE)
transmitter. To change the Illuminated Approach status,
4