Changing Fcw And Active Braking Status - Jeep 2014 Grand Cherokee Owner's Manual

The forward collision button is located on the switch
panel below the Uconnect® display.
To turn the FCW system OFF, press the forward collision
button once to turn the system OFF (led turns on).
To turn the FCW system back ON, press the forward
collision button again to turn the system ON (led turns
off).
Changing the FCW status to "Off" prevents the system
from warning you of a possible collision with the vehicle
in front of you.
Changing the Active Braking status to "Off" prevents the
system from providing limited autonomous braking, or
additional brake support if the driver is not braking
adequately in the event of a potential frontal collision.
NOTE: The FCW system state is kept in memory from
one key cycle to the next. If the system is turned OFF, it
will remain off when the vehicle is restarted.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217

Changing FCW And Active Braking Status

To Change The FCW Sensitivity And Active Braking
Settings With Uconnect® 8.4/8.4A System Screen — If
Equipped.
Follow these steps to set the FCW Sensitivity and Active
Braking:
1. Press the "Controls" soft-key located on the bottom of
the Uconnect® display.
2. Press the "Settings" soft-key.
3. Press the "Safety & Driving Assistance" soft-key.
4. Press the "FWD Collision Warning", Far or Near
soft-key for your desired preference.
5. Press the "Active Braking" On or Off soft-key.
NOTE: A check mark will appear in the selection box to
indicate the setting.
3