Engine Oil Change Indicator System - Jeep 2014 Grand Cherokee Owner's Manual

as there is a stored message, an "i" will be displayed in
the EVIC's compass/outside temp line. Examples of this
message type are "Right Front Turn Signal Lamp Out"
and "Low Tire Pressure".
• Unstored Messages
This message type is displayed indefinitely or until the
condition that activated the message is cleared. Examples
of this message type are "Turn Signal On" (if a turn signal
is left on) and "Lights On" (if driver leaves the vehicle).
• Unstored Messages Until RUN
These messages deal primarily with the Remote Start
feature. This message type is displayed until the ignition
is in the RUN state. Examples of this message type are
"Remote Start Aborted - Door Ajar" and "Press Brake
Pedal and Push Button to Start".
UNDERSTANDING YOUR INSTRUMENT PANEL 301
• Five Second Unstored Messages
When the appropriate conditions occur, this type of
message takes control of the main display area for five
seconds and then returns to the previous screen. An
example of this message type is "Automatic High Beams
On".

Engine Oil Change Indicator System

Oil Change Required
Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will flash in the EVIC display for approximately 10
seconds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.
4