Contents
Connections
o Pass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last
(Default):
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CD
:
z
z"Pass Through Source" can be set when any of the HDMI
connectors is assigned to "CD" for the input source in the "Input
Assign" setting. (v p. 167)
"Pass Through Source" can be set when "HDMI Control" is set to "On" or "HDMI
Pass Through" is set to "On".
Front panel
Display
Playback
The most recently used input source will
go into standby mode.
Pass through the selected input source.
Rear panel
Settings
o TV Audio Switching
Sets automatic switching to the "TV Audio" input when a TV connected
via HDMI sends an appropriate CEC control command to the AVR.
On
(Default):
Off:
"TV Audio Switching" can be set when "HDMI Control" is set to "On".
159
Remote
Tips
Appendix
Select the "TV Audio" input automatically
when receiving a command from the TV.
Do not select the "TV Audio" input
automatically when receiving a command
from the TV.
Index