Marantz SR5009 Owner's Manual page 150

Contents Connections
Audyssey
Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ
Dynamic Volume ® . These can be selected after Audyssey
been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 243).
0 "MultEQ ® XT", "Dynamic EQ" and "Dynamic Volume" settings are stored for each
input source.
0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ
"Dynamic EQ" and "Dynamic Volume" settings cannot be configured.
0 This cannot be set when the input mode is set to "7.1CH IN".
Front panel Display
Playback
o MultEQ
® and Audyssey
® Setup has
® XT",
Rear panel 150
Settings Tips
® XT
MultEQ ® XT compensates for both time and frequency characteristics
of the listening area based on Audyssey
Selection is done from three types of compensation curves. We
recommend the "Reference" setting.
Selects the default calibrated setting with
Reference
a slight roll off at high frequencies, which
(Default):
is optimized for movies.
Selects the reference setting, but
L/R Bypass: bypasses MultEQ
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
Flat:
listening position is closer to the
speakers.
Off : Do not use "MultEQ
When using headphones, "MultEQ ®
Remote
Appendix
® Setup measurement results.
XT on the front left
®
XT".
®
XT" is automatically set to "Off".
Index