Decorative Accessory Installation - Empire Comfort Systems VFLL38FP30LN-1 Installation Instructions And Owner's Manual

Contemporary linear vent-free fireplace
Table of Contents

Advertisement

DECORATIvE ACCESSORY INSTALLATION

Failure to position the parts in accordance with the dia-
grams and instructions below or failure to use only parts
specifically approved for use with this heater may result in
property damage or personal injury.
Notice: The Loft series burners may be operated with or
without the Decorative accessory options. Follow the
directions below should you choose to enhance your
Loft burner with any one of the available decorative
options.
Note:
VFLL38 burner pan will accept two square feet of Deco-
rative Glass.
DECORATIvE GLASS ACCESSORY pLACEMENT
The Decorative Glass options are available in various colors and
package sizes. Choose the size appropriate for your fireplaces.
See list on page 7.
Use of gloves and eye protection is required while applying
the decorative glass.
Application of the Decorative Glass should only be per-
formed after the Loft burner has been fully installed, secured
and tested for leaks. If operating the burner with a Remote
Control, make sure all batteries are installed and that the Loft
burner operates with the remote correctly.
Page 16
WARNING
CAUTION
INSTALLATION
1.
Remove glass front from fireplace by lifting the glass front
up, sliding it to the right, and then carefully angle left side out
of the slots. See Figure 19.
Figure 16
Figure 17
Figure 18
TOP VIEW
Figure 19
29516-2-0912

Advertisement

Table of Contents
loading

Table of Contents