Pioneer HTZ-55DV Operating Instructions Manual page 78

Hide thumbs Also See for HTZ-55DV:
Table of Contents

Advertisement

1 1 Controlling Other Equipment
78
En/Fr
Deleting a single
command
1
Press and hold REMOTE SETUP
for 3 seconds.
2
Press the MULTI CONTROL
button related to the command
you want to delete.
For example, press
VIDEO V
command you want to delete is one for a
VCR connected to the Video 1 inputs.
3
Use the number buttons to
enter 976.
4
Press the same MULTI CON-
TROL button again.
In the above example, press
again.
5
Press twice the command
button you want to delete.
Deleting all commands
for a component
1
Press and hold REMOTE SETUP
for 3 seconds.
2
Press the MULTI CONTROL
button related to the com-
mands you want to delete.
For example, press
VIDEO V
commands you want to delete are for a
VCR connected to the Video 1 inputs.
3
Use the number buttons to
enter 976.
4
Press the same MULTI CON-
TROL button twice more.
In the above example, press
twice.
Comment supprimer
une seule commande
1
Appuyez et maintenez enfoncé
REMOTE SETUP pendant 3
secondes.
2
Appuyez sur la touche MULTI
CONTROL correspondante à la
commande que vous souhaitez
-
if the
1
supprimer.
Par exemple, appuyez sur
la commande que vous souhaitez
supprimer correspond à un magnétoscope
raccordé aux entrées Video 1.
3
Utilisez les touches numérotées
pour entrer 976.
-
1
VIDEO V
4
Appuyez à nouveau sur la même
touche MULTI CONTROL.
Dans l'exemple antérieur, appuyez à
nouveau sur
5
Appuyez deux fois sur la touche
correspondante à la commande
que vous souhaitez supprimer.
Comment supprimer
toutes les commandes
d'un composant
1
Appuyez et maintenez enfoncé
-
if the
1
REMOTE SETUP pendant 3
secondes.
2
Appuyez sur la touche MULTI
CONTROL correspondante aux
commandes que vous souhaitez
supprimer.
Par exemple, appuyez sur
les commandes que vous souhaitez
-
1
VIDEO V
supprimer correspondent à un
magnétoscope raccordé aux entrées Video
1.
3
Utilisez les touches numérotées
pour entrer 976.
4
Appuyez deux fois de plus sur la
même touche MULTI
CONTROL.
Dans l'exemple antérieur, appuyez deux
fois sur
-
1
VIDEO V
-
.
1
VIDEO V
-
1
VIDEO V
-
.
1
VIDEO V
si
si

Advertisement

Table of Contents
loading

Table of Contents