Cradlepoint MBR1400 Series Product Manual page 80

MBR1400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT
6.7.4 WiFi Settings (Advanced Mode only)
When you select the Wireless (WiFi) Networks
Settings tab in the Local Network Interfaces
section, you have several additional options for
configuring your wireless LANs under the WiFi
Settings heading.
WiFi band: Select the range of frequencies the
router will use. The MBR1400 can operate in either
the 2.4 GHz or the 5.0 GHz ranges. (Default: 2.4
GHz. The included WiFi antennas are 2.4 GHz. 5
GHz antennas are available as an accessory.)
Random Channel: Select to randomize the WiFi
channel. This makes it less likely that the wireless
signal from this router will conflict with another
router in the same area.
Optimize WiFi/WiMAX coexistence: (Shows if
Random Channel is selected and the WiFi Band is
2.4 GHz.) Setting this will lessen any possible
conflict with WiFi in the 2.4 GHz band and an
attached WiMAX modem. If a WiMAX modem is
attached to the router when the WiFi is enabled, the
WiFi channel and transmit power will be set to levels
that optimize the performance of the WiMAX
modem. If no WiMAX modem is attached, then default channel and power settings will be used even if this is selected.
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 78