Cradlepoint MBR1400 Series Product Manual page 77

MBR1400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT
Ethernet Port Configuration
Ethernet Port Configuration
controls for your router's Ethernet ports.
There are five total ports: one blue port and
four numbered orange ports. While default
settings will be
circumstances, you have the ability to
control: Mode (WAN or LAN) and Link
Speed. Additional controls for WAN ports
are available in Internet → Ethernet
Settings.
Mode: WAN or LAN. Default setting is WAN
(Wide Area Network) for the blue port and
LAN (Local Area Network) for the four
orange ports.
 Internet (WAN) is used to connect to
another network such as a hotel or
office wired
connection is used as a possible source of internet for the MBR1400.
 Local Network (LAN) is for connecting a computer or similar device directly to the router with an Ethernet cable.
Link Speed: Default setting is Auto. The Auto setting is preferred in most cases.
 Auto
 10Mbps - Half Duplex
 10Mbps - Full Duplex
 100Mbps - Half Duplex
 100Mbps - Full Duplex
 1000Mbps - Full Duplex
© 2011 CRADLEPOINT, INC.
provides
sufficient in most
network. The WAN
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 75