Related Manuals for Whirlpool ACM 702
Summary of Contents for Whirlpool ACM 702
- Page 1 INSTRUCTION FOR USE - ACM 702 145 mm 210 mm 145 mm 180 mm ENGLISH Instructions for use Page 2 5019 319 01515...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION This manual contains important information regarding thermoprotector activates, automatically switching off safety, the use and maintenance of your new hob. Read the the hob. The display shows an error message manual carefully and keep it in an easily accessible place for (see. -
Page 3: Installation And Electrical Connection
INSTALLATION and ELECTRICAL CONNECTION Installation must be carried out by a qualified electrician The power supply cable must be long enough who is fully aware of current safety and installation to allow the hob to be removed from the regulations. The manufacturer declines all liability for injury worktop and must be positioned so as to avoid to persons or animals and for damage to property resulting damage or overheating caused by contact with... -
Page 4: Installation And Fixing
Installation and fixing The worktop must be -20 50mm thick. If necessary, cut the kitchen unit and worktop to fit before The installer is responsible for any damage or installing the hob. Clean the cutout of any chips that could injury resulting from incorrect installation. -
Page 5: Control Panel
fig. 3 fig. 4 Undercounter oven installation: • If an oven (which must be of our manufacture) is to be installed under the hob, ensure it is equipped with a cooling system and observe the distances given in the 5 mm figure to the side. -
Page 6: Control Panel Warnings
Switching on and adjusting cooking zones Heat setting indicator Button - Button + Selected cooking zone Cooking zone indicator positioning After switching on the hob and positioning the pot on the Fast boil function (Booster) chosen cooking zone, adjust the heat setting using the This function, only present on some cooking zones, makes button +. -
Page 7: Care And Maintenance
MAINTENANCE Care and maintenance To clean the hob, proceed as follows: Clean the hob after each use in order to avoid damaging 1. use a soft clean cloth, absorbent kitchen wipes or a the surface and to prevent the formation of baked-on proprietary cleaner for glass ceramic hobs. -
Page 8: Serial Number
Failure to comply with these instructions may compromise the safety and quality of the product. Appliance data plate MODEL SERIALNUMBER BRAND USER ADVICE Energy saving tips • The symbol on the appliance, or on documentation enclosed with the appliance, indicates that this product For optimum results, observe the following advice: must not be treated as household waste, but must be •...