&
x4
(M4 X L12)
%
Front
$
Rear
(Correct assembly)
Side View
✎
NOTE
x
Make sure to distinguish between the front and back of each component when assembling them.
x
Make sure that at least two persons lift and move the TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the TV placed down, it may lean to one
side.
Assembling the Holder-Wire stand
Top View
ATTENTION
DO NOT USE
DO NOT USE
DO NOT USE
GREASE
OIL
CHEMICALS
'
(M4 X L8)
(QJOLVK
✎
Place a soft cloth over the table to protect the TV, and
then place the TV on the cloth screen side down.
✎
Insert the Stand Guide into the slot of TV bottom side.
(Incorrect assembly)
x4