■
Automatic Network Setup
Use the Automatic
that supports DHCP. To set up your TV's cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to the
(MENUm
Settings
◀
2. Select Wired, press ENTERE, and then
press
ENTERE
3. The network test screen appears and
verifies the network connection. When the
connection has been verified, the "Internet
connection successful." message appears.
Network Settings
Network Settings
→
→
Network
Network
→ ENTERE)
again.
when connecting your TV to a network
screen.
Network Settings
Select a network connection type.
● The displayed image may differ depending on the
English
Wired
Wireless (General)
Connect to the network using
WPS(PBC)
LAN cable. Please make sure
that the LAN cable is connected.
One Foot Connection
model.
▶
Previous
Next
Cancel