Panasonic Lumix DMC-ZR3 Operating Instructions Manual page 217

The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
 [PLEASE SET THE CLOCK] message will be displayed; please re-set the clock. When
taking pictures, it will not be possible to record the correct date without setting the clock.
(P18)
When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colors which are not actually present.
•
It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
Zooming stops instantaneously.
•
When using the Extended Optical Zoom or the Intelligent Zoom, the zooming action will stop
temporarily. This is not a malfunction.
Zoom does not go up to maximum magnification.
•
Is the camera set to Macro Zoom Mode?
Maximum zoom during Macro Zoom Mode is 3M Digital Zoom.
The file numbers are not recorded consecutively.
•
When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation.
The file numbers are recorded in ascending order.
•
If the battery was inserted or removed without first turning the camera's power off, the folder
and file numbers for the pictures taken will not be stored in the memory. When the power is
then turned back on and pictures are taken, they may be stored under file numbers which
should have been assigned to previous pictures.
[AGE] is not displayed correctly.
•
Check the clock (P18)
The lens barrel is retracted.
•
The lens barrel retracts about 15 seconds after switching from [REC] Mode to [PLAYBACK]
Mode.
When the camera is left alone, the slide show is suddenly displayed.
•
This is the [AUTO DEMO] to introduce the features of the camera. Press a button to return the
camera to the original screen.
Others
(P57)
and birthday settings (P68).
- 183 -
(P156)