Table Of Contents; Contents; Note The Following Before Starting - Husqvarna EA 850 Operator's Manual

Contents

CONTENTS
Contents ......................................................................
Note the following before starting: ................................
WHAT IS WHAT?
What is what on the edger attachment? ......................
SAFETY INSTRUCTIONS
Machine's safety equipment ........................................
General safety precautions ..........................................
General working instructions .......................................
Basic working techniques ............................................
ASSEMBLY
Fitting the bevel gear ...................................................
Fitting the cutter ...........................................................
STARTING AND STOPPING
Starting and stopping ...................................................
MAINTENANCE
Bevel gear ....................................................................
Lubricating the flexible drive shaft ................................
Adjusting the edger's cutting depth ..............................
Maintenance schedule .................................................
TECHNICAL DATA
Technical data ..............................................................
2 -
English
CONTENTS

Note the following before starting:

Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
2
2
These instructions supplement the instructions that were
included with the machine. For other procedures, please refer
to the operating instructions for the machine.
3
Husqvarna AB has a policy of continuous product
4 development and therefore reserves the right to modify the
design and appearance of products without prior notice.
4
5
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
6
7
!
7
8
9
9
9
9
!
9
The machine is only designed for edging lawns.
WARNING! Under no circumstances may the
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
WARNING! This accessory may only be used
together with the intended clearing saw/
trimmer, see under heading "Approved
accessories" in chapter Technical data in the
machine's Operator's Manual.