Trim Kit Assembly And Aisassembly Method - Kenmore 795.77192600 Service Manual

3-11 TRIM KIT ASSEMBLY AND AISASSEMBLY METHOD (795.77719,77729 MODELS ONLY)
3-11-1 ASSEMBLY AND DISASSEMBLY METHOD OF LEFT DOOR GLASS AND DISPLAY OF THE REFRIGERATOR
1. Remove the 2 screws on the top
refrigerator door trim, circled in Photo
# 1.
2. Remove the 2 screws on the bottom
refrigerator door trim, circled in photo
# 2.
3. While holding the door handle (to
prevent it from falling) remove the 3
screws on the side trim that holds the
handle on.(see photo # 3)
4. Remove the door handle. (see photo
# 4)
5. While lifting up on the top door trim,
slide the glass front (above the
dispenser) to the right to remove it.
(see photo # 5)
6. While pulling down on the bottom door
trim, slide the glass front (below the
dispenser) to the right to remove it.
(see photo # 6)
7. Once the glass is removed, the
dispenser cover can be removed by
pulling it out by the right side and gently
pulling out of the left door trim slot. (see
photos 7 & 8)
8. The right side door glass is removed
in the same manner as the left.
However because it will not have the
dispenser the glass will be one
piece.
9. Reassemble in reverse order.
1
3
5
7
- 13 -
2
4
6
8